Wireless Elm327 WIFI OBD 2 Car Diagnostic Reader Scanner - Support All OBDII Protocols
Features
- There are tons of software available, which are fully compatible with WIFI OBD interface, such as engine running parameters monitoring, DTC reading and clearing, MPG meter, etc
- SSID: OBDDevice, IP/Port: 192.168.0.10:35000, Antenna: Internal
- Power Consumption: 0.75 Watts, Wifi Standard: 802.11a/b/g
- Operating Temperature: -15 to 100 Celsius
- Item size: 15x13x4cm, Item weight: 5.50oz
Product Description: Wireless Elm327 WIFI OBD 2 Car Diagnostic Reader Scanner - Support All OBDII Protocols
By using the device you can monitor all these parameters from your PC, Mac, iPhone, Ipad etc with a compatible software or you can even write your own software on a specified hardware platform if need, because the AT commands are fully documented and very well explained. With proper software installed in the host device, you may have following parameters read out from your vehicle Vehicle Speed RPM Fuel Consumption Engine Coolant Temp Fuel Pressure Calculated Engine Load Throttle Position Intake Manifold Pressure Air Intake Temp Timing Advance Mass Air Flow Fuel Level Barometric Pressure EVAP System Vapor Pressure Fuel Trim Some examples for iOS applications are Rev, FUZZYcar, DashCommand Note : Your vehicle may not support all above pa
No comments:
Post a Comment